CONDUCTIVITY TDS METER & PROBE

1. Multi-Point Push-button Calibration (up to 5 points) with plus or minus 1% full scale accuracy.
2. Automatic or Manual Calibration: For quick, easy calibration, use automatic mode with preset calibration points at most popular values or manually set values in the manual mode for more flexibility.
3. Auto Ranging for Conductivity/TDS measurements for fast response and best resolution over wide measurement range.
4. Adjustable TDS Factor for more accurate measurement (for TDS 6 model only)
5. Automatic Temperature Compensation (ATC) for the optimum accuracy under fluctuating temperatures.
6. Hold Function momentarily freezes reading for easy viewing
7. Auto-Power Off saves battery power after non-use
8. Self-Diagnostic with message codes for easy troubleshooting
9. Large Custom LCD provides optimum viewing even at a distance
10. Electrode with Built-in ATC designed for minimal air bubble entrapment during measurement.
11. Protective rubber boot shields meter from drops and features a sturdy built-in stand for easy bench-top operation.
12. Meter Kit (Optional) – contains everything you need for calibration and measurement in a rugged carrying case.

Product Specifications:

• Conductivity Range: Not Available
• TDS Range: 0 to 9.99, 99.9, 999 ppm, 9.99, 99.9 ppt, maximum 199.9 ppt (depending on factor setting).
• Resolution & Accuracy: 0.01, 0.1, 1 ppm & 0.01, 0.1, 1 ppt, plus or minus 1% full scale.
• TDS Factor: 0.40 to 1.00 (default 0.67).
• Temperature Range: 0 to 100.0 degree Celsius.
• Resolution & Accuracy: 0.1 degree Celsius & plus or minus 0.5 degree Celsius.
• Temperature Compensation: Automatic / Manual (0 to 80 degree Celsius).
• Cell Constant: 0.1, 1.0, 10.0 (selectable).
• Temperature Coefficient: 2% degree Celsius.
• Number of Calibration Points: Up to 5 maximum (1 per range).
• Special Functions: Auto Power Off after 17 minutes. Hold & Self-diagnostic messages.
• Power 4 AAA x 1.4V batteries.