Loading... Please wait...

Currency Displayed in

Wish Lists
View Cart (0) 0.00    
Checkout
Image 1

Hover over image to zoom

  • Image 1

Micom Led Heater 50W

$39.95

 Product Description

 CS064A Series    Micom Led Heater  
  ﹝Modeling Function. Safty All In One.﹞  		  
 
 
 
 
 
 
 
 
 
 
 
 
 
  Features
 
  1.Micro controller makes flash at abnormal temperature.     2.2 in one LED indicator and thermometer.
  3.Dial easily ,very convenient.     4.Excellent thermal powder diffusion ,more efficient heat distribution in water.
  5.Fully submersible and excellent water-proof.     6.Plastic heater guard protects fish against scald.
 
  Instruction for use
 
1.   Fully submerse heater and fix it horizontally or vertically to the glass with suction hook and thenplugging in power source.
  Light is on：
Heating
  Light is off：
Stop heating
●   Temperature range：
20℃～34℃
●   Tolerance：±1℃
 
2.   When the heater uses, please make sure the heater fully submerse in the water. The maximum depth of immersion is 1.2m.  
 
3.   While plugging in power or power failure than back. The LED indicator will show the preset temperature like 26℃. After flashes 8 timesit will turn to the real water temperature.  
 
4.   Press the button one time to increase 1℃ ﹝20℃～34℃ cycle﹞.
 
5.   When setting temperature. The LED indicator will flashes 8 times then return to the real water temperature.  
 
6.   Heating light on：when the water temperatures doesn't reach the default temperature, the heater will keep heating.  
 
7.   Heating light off: when the water temperatures reached the default temperature, the heater will stop heating.  
 
8.   If the water temperature is over 35℃, LED indicator will flashes and stop heating.  
 
9.   If the water temperature is below 19℃, LED indicator will flashes and keep heating.  
 
10.   Abnormal water temperature：when the LED indicator shows  is over temperature signal ﹝over 38℃﹞. Besides, shows  is low temperature signal ﹝below 10℃﹞; both stop heating.  
 
11.   Press the button for over 4 seconds. The LED indicator will show unit and decimal point of the water temperature. Attention: during the abnormal situation this function is unable to flashes caution.  
 
12.   Press the button for one time the LED indicator returns to normal display.  
 
11.   Abnormal press the button more than 8 seconds. The LED indicator will flashes Er﹝Error﹞ to caution and stop heating.  
 
  Reference for choosing Heater
 
△t°
Gal,
USA		 7.8 18 36 52 78
Gal, 
UK		 6.6 15 30 44 66
Liters 30 70 140 200 300
5℃
9°F		 50 100 200 300 2x200
10℃
18°F		 50 100 200 300 2x300
15℃
27°F		 100 200 2x200 2x300 3x300
WATTS
  △t°＝Optimum aquarium temperature-Minimum
          room temperature
●Above listed data just for reference		  
 
  Important notes
 
1.   When raising the noble fish, please add to use the Micom thermostat for dual protection.﹝The setting Micom thermostat's temperature must be higher than heater temperature by 1℃ or more ﹞
 
2.   Please avoid hitting the heater and do not use the cracked heater.
 
3.   When the heater uses, please make sure the heater fully submerse in the water.
 
4.   Fixed the heater horizontally or vertically to where has better circulation of water.
 
5.   Plug in the power cord using a drip loop to prevent water from traveling along the cord and coming into contact with the receptacle.
 
6.   Young children or infirm persons without supervision do not intend the heater for use.  
 
 
  Repair & Maintenance
 
1.The electric wire can't be replaced, if electric wire has damaged this heater
   must be scrapped.

2.The plug need to be regularly clean up the contamination oxide happened.

3.The foreign matters ﹝calcium substance, limescale﹞ on the glass need
   to be eliminated.

※Method as below：

   ﹝1﹞Prepare 20l water and 200g citric acid. 

   ﹝2﹞Put heater in the tank then add citric acid in the water. 

   ﹝3﹞Set the temperature for 34℃.

   ﹝4﹞Counting the time for 12 hours then check heater again. 

※Make sure to unplug the power source or cut off the power
    source before proceeding the repair and maintenance.
 
  Emergency Handing
 
Please cut off the power source and unplug the electric wire for safety, if any situations of danger or urgency happened.
 
  Limited Warranty
 
all heaters carry 36 months warranty from the date of purchas

 Find Similar Products by Category

Vendors Other Products


View All Products

 Product Reviews

Write review

This product hasn't received any reviews yet. Be the first to review this product!

SKU:
MLH50
Weight:
0.15 KGS
Shipping:
Calculated at checkout
Pin It

SIGN UP FOR SPECIALS

STAY CONNECTED

FacebookYouTube

Copyright © 2007-2021 Sydney Discus World Aquariums. All Rights Reserved.

Click the button below to add the Micom Led Heater 50W to your wish list.